How to Lay Wooden Steps on a Concrete Ladder"
A practical advice how to make this functional in your home. Observed if the surface is regularized and if the steps are the same height. If this is not true in your case, make a sub floor. “A new cement layer can correct small differences,” explains the São Paulo an architect in Décio Navarro. “Then is necessary to wait about 30 days for the cement to dry,” says Dimas Gonçalves, of IndusParquet. Only then the solid wood can be rested, by a simple procedure that requires only a glue and screws. The boards should come in the measure – for a perfect finish. Drill the video drill into four dots, insert the bushings and drill the holes into the wood. Apply PU glue to the surface, support the board and screw. The heads of the screws should be at least 1 cm low. Use dowels to hide and finish.
Source.
...
Source:
architectureadmirers
URL:
http://www.architectureadmirers.com/
| -------------------------------- |
| Waugh Thistleton designs CLT office block for Storey | Architecture | Dezeen |
|
|
