Isolation is one of the most important elements in any object, but we bring you instructions on how to completely isolate the key parts of the house, apartment or office. Installing stone wool on partition walls will prevent the spread of the noise. Thanks to an interwoven fibrous structure, stone wool absorbs sound and thus provides optimum sound insulation between rooms.

Determine the final thickness of the wall and on the floor highlight where you want to place the U brackets, consider to leave 1 cm distance between the wall and the metal structure that will be set later.
Put double-adhesive tape to the floor, the ceiling and the side walls. On the tape on the floor and ceiling set the U supports using the pendulum to determine the perfect match. Mounts mechanically fasten using screws and a drill. Put the duct tape on the side walls. Screw to secure the metal frame using screws and a drill.
Measure the width of the insulation slab. This will be the width of the measure of the distance of vertical elements of metal structures (for example: every 60 cm).
Metal ‘C’ profiles should be set at exactly measured distances and ensure it is completely vertical in relation to the profiles on the floor and the ceiling. Tighten the profiles with screws.
Put the wool slabs in the space between the vertical guide rails. Using minimal force slab into the hole of the ‘U’ bracket. The plates are installed from the bottom up. In the remaining space to the ceiling,...